Vitamix EXPLORIAN Serie Manual Del Usuario página 6

c p
o n t r o l a n e l
On /Off (I/O) Switch – The On/Off switch controls power to
the machine.
Variable Speed Dial – The Variable Speed Dial gives you manual
control from Variable 1 (slowest) to 10 (highest).
Pulse ( ) – The blades will rotate at the speed displayed on
the control panel when pressed.
b
l e n d i n g
Note: The 20 ounce cup mentioned here are optional accessories of the Explorian Blenders when used with a Vitamix Personal Cup Adapter. Please
visit vitamix.com for more information. Refer to the Personal Cup Adapter Owner's Manual for usage details.
To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids in a Large Container.
Escaping steam, splashes or contents may burn. Always start on Variable 1, then slowly increase to 10.
DO NOT use your 20 ounce cup to heat ingredients or to blend hot liquids. Heated ingredients and liquids
may create internal pressure which could cause the cup to burst and cause injury.
DO NOT continuously use your machine for more than 2 minutes with the 20 ounce cup and Personal Cup
Adapter.
If a cup becomes warm to the touch or steams or vents, immediately stop blending ingredients and turn
off or unplug blender. Allow the cup and ingredients to cool to room temperature before removing the
blade base.
Parts will become hot with extended use.
DO NOT touch the drive socket in the blender base or the drive spline in the Personal Cup Adapter.
To avoid damage or personal injury, DO NOT use the cups (including the blade base or lids) in the microwave.
1. Load your container according to your recipe or the load order in the
illustration here.
IMPORTANT! Always use the lid and the lid plug on the Large Container when the
machine is in operation. Never operate the blender without checking to make sure
that the lid and lid plug are securely locked in place.
2.
Push the lid down into place until the two tabs snap onto the lip of the
container. Insert the lid plug. Turn the lid plug clockwise to lock.
3. Put the container onto the base.
4.
Look at the variable speed dial. Make sure it is pointing to Variable speed 1.
Press On/Off to start the machine. The blades will begin to turn.
5.
Rotate the Variable Speed Dial between 1 and 10 during the blending cycle to
increase or decrease the speed of the blades.
6
All manuals and user guides at all-guides.com
WARNING
Pulse
Variable Speed
Dial
Ice & Frozen
Ingredients
Fruits & Veggies
Leafy Greens
Dry Goods
Liquids
On/Off
Switch