XPR Access MINI-SA2 V2 Instrucciones De Montaje página 4

PROGRAMMING FLOWCHART
Enroll Master and Delete Card
1. Turn OFF the power supply
2. Push dip switch no.1 in position OFF.
3. Turn ON the power supply. All three LEDs will blink continuously.
4. Enter Master Card. Red and Yellow LED will blink.
5. Enter Delete Card. Red LED will blink.
6. Turn OFF the power supply.
7. Put the dip switch in position ON.
NOTE: Changing Master and Delete Card is done with the same procedure. Old Master and Delete Card are deleted
automatically.
Enroll a User
Cards can be programmed individually or as a block of sequential cards.

For each User, 2 cards are being programmed: 1 User Card and 1 Shadow Card.

The User Card is issued to the User and the Shadow Card is kept on safe place.

If the User Card is lost or stolen, the Shadow Card will be used to delete the corresponding User Card.

INPUT
1. Present Master Card
2. Present Shadow Card
3. Present User Card (or multiple User cards)
4. Present Master Card
NOTE: Shadow card can be issued for 1 user or for group of users. In both cases, write the name of the user on the
shadow card and keep all of the shadow cards on safe place.
NOTE: If more than one user is associated to same shadow card, deleting with that shadow card will result with deletion
of all the Users associated to that shadow card .
NOTE: If a shadow card needs to be changed, just enroll the same User with different Shadow card.
Shadow
Card 1
130 22346
Shadow
Card 2
130 22345
Shadow
Card 3
130 22344
Enroll block of user cards
INPUT
1. Present Master Card
2. Present Shadow Card
3. Present the beginning card of the block 3 times
4. Present the ending card of the block 3 times
5. Present Master Card
NOTE: The block of User cards can be maximum 100 Cards.
User Card 1
130 22349
User Card 2
OR
130 22348
User Card 3
130 22347
Dip switch no.1
INDICATION
short + long beep
short + 3 short beeps
OK beep
short + 5 short beeps
User Card 1
Group
User Card 2
Shadow
Card
233 26735
User Card 3
INDICATION
short + long beep
short + 3 short beeps
OK beep
OK beep
short + 5 short beeps
ON
MASTER Card
1 2
DELETE Card
Example: Enroll 2 Users
Present Master Card
Present Shadow Card
Present User Card
Present Master Card
Present Master Card
Present Shadow Card
Present User Card
Present Master Card
130 22349
130 22348
130 22347
Example: Enroll 100 cards
Present Master Card
Present Shadow Card
Present the beginning card of the
block 3 times (ex. 180 20001)
Present the ending card of the
block 3 times (ex. 180 20100)
Present Master Card
204 27141
204 27140
204 27142
4