Safety
Signs, symbols and instructions placed on this product must never be covered or removed and must
remain present and clearly legible throughout the entire lifetime of the product. Immediately replace or
repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instructions.
Caregiver
Read all of the instructions carefully before use and keep them for future reference.
Incorrect use of this product may cause serious injury to the user
Always use the correct lifting and transfer techniques for this purpose. Read the user
manual of the transfer equipment before use
Never leave the user unattended in this product. Ensure permanent supervision by an
adult
Repair/replacements must only be made using new original R82 spare parts and fittings
and carried out in accordance with the guidelines and service intervals prescribed by the
supplier
If there is any doubt as to the continued safe use of your R82 product or if any parts should
fail, stop using the product immediately and contact your local dealer as soon as possible
When the user is moved in the product from one room to another or to an outdoor area in
case of an emergency, please ensure that the area is flat and without any obstacles
Environment
For the purpose of safety and comfort, always move the product away from the sun and
allow to cool before use
Use this product on a level surface without any obstacles. Be aware of reduced manoeu-
vrability on slippery surface
When using on inclines, please refer to measurements
User
If the user is close to the max. load limit and/or has a lot of involuntary movements, e.g.
rocking, a larger size with a higher max. load or a different R82 product should be consid-
ered
Product
Carry out all positional adjustments on the product and accessories and ensure that all
knobs, screws and buckles are securely fastened before use. Keep all tools out of the reach
of children
Activate the brakes before placing the user into the product
Ensure the stability of the product is maintained before placing the user in it
We recommend you notify the user before angling the back
Ensure the castors are fully-functional and secure before use
Inspect the product and all of its accessories and replace any worn out parts before use
Be careful not to get your fingers squeezed
This product is tested for resistance to ignition at level non-ignition in accordance with EN-
1021-1 and EN 1021-2
The product might lose its flame resistant characteristics if using other than original R82
cushions
The plugs needs to be mounted in the slots placed on each side of the Cricket when
accessories is not mounted in the slots.
Shopping net needs to be emptied before folding the Cricket
support.R82.org
ENGLISH
21
EN