The programme dial can be turned
either clockwise or anticlockwise.
Off = Reset programme/switching OFF
of the appliance
If you turn the programme
dial to another programme
when the appliance is
working, the yellow indicator
of Start/Pausa button flashes
3 times. The display shows
the message Err to indicate
a wrong selection. The
appliance does not perform
the newly selected
programme.
10.4 Starting the programme
Press button Start/Pausa to start the
programme. The corresponding red
indicator stops blinking.
The indicator Lavado is on to indicate
that the appliance starts operating.
The indicator Secado is on to indicate
the door is locked.
If you have chosen a delayed start with
button Inicio Diferido, the appliance will
begin the countdown.
If you set an incorrect option, the yellow
indicator of button Start/Pausa blinks for
3 times. The display shows the message
Err for some seconds.
10.5 Starting a programme
with the delay start
Set this option after you have set the
programme and before you press button
Start/Pausa.Before you start the
programme, if you wish to delay the
programme start, press button Inicio
Diferido repeatedly, to set the desired
delay.
The symbol
appears on the display.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2 hours
and then by 1 hour up to a maximum of
20 hours.
The set delay time value appears on the
display for about 3 seconds, then the
duration of the programme appears
again.
You can modify or cancel the delay time
at any moment, before you press button
Start/Pausa.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the button Start/Pausa to set the
appliance to pause. When the indicator
Puerta bloqueada goes off , the door can
be opened. Add the laundry, close the
door and press button Start/Pausa again.
Setting the delayed start.
• Set the programme and the required
options.
• Set the delay start.
• Press button Start/Pausa: the
appliance starts its hourly countdown.
The programme starts after the
selected delay has expired.
Cancelling the delayed start
• Press button Start/Pausa to set the
appliance to PAUSE;
• Press button Inicio Diferido until the
symbol
' is displayed;
• Press button Start/Pausa again to start
the programme.
The set delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with Drain
programme.
10.6 Altering an option or a
running programme
It is possible to change some options
before the programme operate. Before
you make any change, you must press
Start/Pausa button to pause the
appliance.
Changing a running programme is
possible only by resetting it.
Turn the programme dial to Off and then
to the new programme position.
Press Start/Pausa button again to start
the new programme. The washing water
in the tub will not be drained.
ENGLISH
17