26
MAKING CONNECTIONS
Connecting a PC
NOTE
It is recommended to use an HDMI connection for the best image quality.
y
Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in
y
use.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
y
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture
is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
y
Depending on the graphics card, some resolution settings may not allow the image to be
y
positioned on the screen properly.
If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the
y
instructions on the next page.
When using the HDMI/DVI cable, Single link is only supported.
y
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HdMI Connection
Choose any HDMI input port to connect.
It does not matter which port you use.
(*Not Provided)
HDMI
PC