Registering Magic Remote Control; How To Use Magic Remote Control; Precautions To Take When Using The Magic Remote Control - LG 47LA8600 Manual Del Proprietário

32
MAGIC REMOTE CONTROL FUNCTIONS

Registering Magic Remote Control

The Magic Remote Control operates by pairing
with your TV.
Please register the remote as follows.
How to register the Magic Remote Control
To register automatically, turn the
TV on and press the
When registration is completed, the
completion message appears on the
screen.
If registration fails, turn the TV off
(Wheel)
and back on, then press the
Wheel (OK) to complete
registration.
How to Re-register the Magic Remote Control
1 Press and hold the
and SMART
BACK
together for 5 seconds to
reset, then register it by
following "How to register the
Magic remote control" above.
SMART
2 To re-register the Magic remote
control, press and hold the
BACK button for 5 seconds
toward the TV.

How to use Magic Remote Control

1 You can move the pointer by
aiming the Pointer Receiver of the
remote control at your TV then
move it left, right, up or down.
» If the pointer does not work
properly leave the remote control
for 10 seconds then use it again.
2 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
» If the pointer has not been used
for a certain period of time, it will
disappear.
Wheel (OK) .
Precautions to Take when Using
BACK
buttons
the Magic Remote Control
y
y
y
y
y
y
If you press Wheel (OK) on the
Magic remote control, the screen
1
appears.
Shows information about the current
program and screen.
2
You can select My Apps Menu.
Use the Magic remote control within the
maximum communication distance (10 m).
Using the remote control beyond this
distance, or with an object obstructing it, may
cause a communication failure.
A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote
control.
The Magic remote control may be damaged
or may malfunction if it is dropped or receives
a heavy impact.
Take care not to bump into nearby furniture or
other people when using the Magic remote
control.
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic remote control may not perform as
expected due to frequency interference.