Assembly And Operation - Arrow OSC9500-A Manual Del Usuario

CHANGING ACCESSORIES
Disconnect the power cord from the power source before
CHANGING ACCESSORIES
making any adjustments or changing accessories. Preventive
Disconnect the power cord from the power source before
safety measures reduce the risk of starting the tool
making any adjustments or changing accessories. Preventive
accidentally.
safety measures reduce the risk of starting the tool
accidentally.
1. Lift the quick release lever and push it firmly forward over
the detent.
the detent.
2. Place the tool upside down on a flat surface.
3. Remove any accessories and adapter.
3. Remove any accessories and adapter.
4. Clean flange and accessories of all dirt and debris.
5. Place the accessory onto the tool and align the hole in the
5. Place the accessory onto the tool and align the hole in the
accessory with the cam of the tool.
accessory with the cam of the tool.
6. Press the quick release lever back into place.
6. Press the quick release lever back into place.
7. Check that the accessory is seated securely. Accessories
7. Check that the accessory is seated securely. Accessories
that are attached incorrectly or are not securely fixed in
place may come loose during operation, thereby putting
place may come loose during operation, thereby putting
you at risk.
you at risk.
8
8

ASSEMBLY AND OPERATION

ASSEMBLY AND OPERATION
OPERATION
WARNING
OPERATION
To reduce the risk of injury, keep hands away
WARNING
from the blade and all moving parts.
WARNING
Always wear proper eye protection marked to
WARNING
comply with ANSI Z87.1.
WARNING
When working in dusty situations, wear
WARNING
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
OSHA compliant dust extraction solution.
WARNING
WARNING
Observe correct main voltage! The voltage of
the power source must agree with the voltage
the power source must agree with the voltage
specified on the nameplate of the machine.