EAntenna DX13M Manual Del Usuario página 3

NO A ESCALA
NOT A ESCALE
How to check when you open the box, all
tubes are inserted in order and properly in
position only to hoist starting with the finer the
tip, matching the screw holes to put in each
section detailing.
In addition to inserting each Hose Clamp in
each sections that we correspond stop having
to save them afterwards when each screw is
inserted.
As you can see in the pictures, which does
not put Guying part the screw head DIN 912
is inserted into the outer tube or larger in
diameter so that the screw head press on the
down tube and lock so any movement caused
by force wind or hoist.
Where is signaled Guying part, once you have
identified each screw, you will see DIN 913 or
headless screw once inserted between 2
tubes with the respective arancelas indicating
the drawing screw the threaded ring DIN 582
to push it right up DIN 127 washer be straight
YES
NO
DIN 127 DIN 913
DIN 125
M6 x 50mm
DIN 582
DIN 912 DIN 125
50X6mm
DIN 985
DIN 912 DIN 125
50X6mm
DIN 985
DIN 127 DIN 913
DIN 125
M6 x 60mm
DIN 582
DIN 912 DIN 125
70X6mm
DIN 985
DIN 912 DIN 125
70X6mm
DIN 985
Antena
DIN 9021
Radiales
DIN 934
BALUN
Feeding point
ENGLISH
155cmX25mm
155cmX30mm
165cmX35mm
165cmX40mm
165cmX45mm
168,5cmX50mm
168,5cmX50mm
168,5cmX50mm