Publicidad
Idiomas disponibles
Idiomas disponibles
MAST
Front Mast Plate View
At first glance all the drawings will be very easy to attach the antenna to the plate and to put this on the mast.
In the upper drawings can be seen as the mast is attached to the plate by the plastics clamps EAHYP050 and inserting screws and DIN
913 M6X70 once all inserted block with self-locking nuts DIN 985 M6.
Once the antenna is fixed to the plate, be aware that you have to leave approximately 2 cm below the lower plastic to feed the antenna at
the bottom outlet.
And to connect the antenna to the mast, it is U-bolts and clamps through illustrated below for a correct position.
Plastic Clapms 50mm
EAHYP050
Tube clamp 50mm
23035.50
ANTENNA
Feeding point
Rear Mast Plate View
Antenna
Mast
ENGLISH
DIN 912 M6X70
DIN 985 M6
EAHYP050
50mm U Bolt
A-0163
Publicidad
