Stanley PB-3 Manual De Instrucciones página 12

Applications
12
1. Plumb:
Establish 2 reference points that need to
be plumb. Align one of the vertical laser
beams to a set reference point. The opposing
laser beam will be projecting a point which
is plumb. Position the desired object until
the laser beam is aligned with the second
reference point that needs to be plumb with
the set reference point.
2. Point Transfer:
Align one of the vertical laser beams to a set
reference point. The opposing laser beam
will be projecting a point which is plumb.
Mark point of the opposing laser beam.
Align the front beam laser to a set reference
point. With a tripod or other stationary
object, rotate the laser unit to project the
front laser beam to a new location. This new
location will be level with the first point.
Mark point of the laser beam.
3. Level:
Use front laser beam to project level
reference point out to desired object
Establish 2 reference points that need to
be level. Align the front beam laser to a
set reference point. With a tripod or other
stationary object, rotate the laser unit
to project the front laser beam to a new
location. This new location will be level with
the first point. Position the desired object
until the laser beam is aligned with the point
that is being moved.
77-118