Mains Adapter; Headphones - Philips EXP210 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Mains adapter

Use only the AY 3170 mains adapter (4.5 V/300 mA direct current, positive
pole to the centre pin). Any other product may damage the set.
1
Make sure the local voltage corresponds to
the adapter´s voltage.
2
Connect the mains adapter to 4.5V DC on
the set and to the wall socket.
Note: Always disconnect the adapter if you are
not using it.
Headphones (SBC HE 205)
Connect the supplied headphones to
G
LINE OUT/p.
Note: LINE OUT/p can also be used for
connecting this set to your HiFi system. Set
VOL E on this set to position 8 and adjust
volume and sound with your HiFi system.
Use your head when using headphones
Hearing safety
Do not play your headphones at a high volume. Hearing experts advise that
continuous use at high volume can permanently damage your hearing.
Traffic safety
Do not use headphones while driving a vehicle. It may create a hazard and it
is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you.
Power supply/Headphones
(supplied or optionally available)
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Exp211Exp213

Tabla de contenido