Sears Kenmore 110.20362810 Manual De Uso página 9

3.
Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap
large items such as sheets around the
HE agitator; load them in loose piles
around the sides of the basket. Try
mixing diff erent sized items to
reduce tangling.
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
4.
Add liquid chlorine bleach to dispenser,
if desired
Liquid
Chlorine Bleach
Do not overfi ll, dilute, or use more than 1 cup (236 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
5.
Add fabric softener to dispenser, if desired
Fabric softener
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer's directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by fi lling the
dispenser with warm water until liquid reaches
the underside of the rim. See max fi ll line arrows.
IMPORTANT: The Fabric Softener knob must be set to "Yes"
when using fabric softener in the fabric softener dispenser.
This ensures that fabric softener is added at the correct time
in the rinse phase and is evenly distributed.
Adding Liquid Fabric Softener Manually to Wash Load
During the fi nal rinse, wait until the washer has completed
fi lling, then press the START/PAUSE/UNLOCK LID/CANCEL
button to pause the washer. Lift the lid and add the measured
recommended amount of liquid fabric softener. Do not use
more than the recommended amount. Close the lid and press
the START/PAUSE/UNLOCK LID/CANCEL button again
to start the washer.
6.
Select cycle
Turn cycle knob to choose your wash cycle. For more
information, see the "Cycle Guide. "
Water
MAX FILL
9