Assembly And Connection Evaluation - Airzone RADIANT365 Guía De Instalación Rápida

You can find the instructions on how to connect and configure other peripherals on their data sheets.
Power supply AZRA6CB1RAD and all the elements which need external power supply. Use (3x1,5 mm
Important: According to the current local and national regulations, it is mandatory to add a switch (or other
element to disconnect the system) to the external supply wiring so that a constant separation between poles is
guaranteed. The system will restart automatically if the supply is eventually turned off. Use an independent
circuit from the controlled system for the power supply.
Note: For the proper functioning of this main control board, all installation main control boards must be addressed and associated
(See Advanced settings section).

ASSEMBLY AND CONNECTION EVALUATION

Check the following aspects:
- The state of the LEDs of the main control board and the rest of control elements. Check the self-diagnose section of
the data sheet of the elements.
- If all the thermostats are powered.
Important: In the main control board, to verify the correct performance, check D3, D11 and D19 LEDs.
ES
EN
FR
IT
PT
DE
2 ) wire.
23