Conceptronic Powerplug Adapter CPNP200 Guía De Instalación Rápida página 39

ENGLISH
D. Enter a name for the current Powerplug Adapter in the field "Alias".
E. Select the type of Powerplug adapter. If the Powerplug adapter you are
configuring is connected to a router or other gateway device, select "Access
point".
If the Powerplug adapter you are configuring is connected to a PC or other client
network device on your network, select "End point".
Note: The type "End Point" is selected by default. It is not required to change this
setting, but when your Powerplug is connected to a router or other gateway
device, is it advised to select "Access point" so the adapter can handle more
data requests.
F. You can secure the configuration of the Powerplug Adapter. Enter a password in
the field "New Password" and confirm it in the field "Confirm Password".
Note: The Powerplug Adapters are configured with a password by default. This
password is programmed in the Powerplug Configurator for easy configuration.
If you change the password, the Powerplug Configurator will ask you for the
password when you try to configure it.
The default configured password is: "paterna" (with small characters).
G. Click "Next" to apply the settings to the selected Powerplug Adapter.
39