KaVo DEXIS Titanium 1.014.6264 Manual Del Usuario página 8

DEXIS Titanium
5. Position the X-ray generator as usual for X-ray film.
Use of the paralleling technique is highly recommended.
Verify connectivity of the DEXIS Titanium to the computer along
Important:
with having a green driver icon before attempting to take an X-ray.
CAUTION
For maximum image quality, make sure the patient remains still
during the exposure.
WARNING
Take the necessary steps to protect yourself from radiation. For
proper operator positioning, refer to the 'Instructions for Use' of your
intraoral X-ray equipment.
6. Acquire the image by pressing the X-ray button on your radiography
system.
Important:
7. Carefully remove the sensor from the oral cavity following the exposure.
8. Grasp the sensor and positioning device and remove the sensor from under
the retaining clips.
9. If needed, grasp the USB connector and pull it straight out of the port on the
computer.
4
CORRECT
It is important that the X-ray beam hits the whole sensor
surface.
USB PORT
INCORRECT
English