Felisatti DC10/14,4L2 Manual Del Usuario página 10

the drill chuck possible.
10. Battery Protection
When the battery is overheating due to
continuous operation, in order to protect the
battery performance will automatically shut off
the power.
Maintenance
Always keep tool and air vent clean for safe work.
1. Changing Tool
Before you change the tool, you must remove the
battery from the body of the electric drill or set the
rotational direction switch in lock position (neutral
position).
Hold the power tool with one hand and rotate the
chuck with the other hand.
- To open the chuck, rotate it clockwise.
- To close the chuck, rotate it counterclockwise.
Insert tool.
Close the chuck fully.
Carry out a test run to check that the tool is
clamped in the center.
2. Using the Hook
You can carry the equipment suspended from
the waist. And the hook can be installed on the
right or left side by fastening screw. When using
the hook pay sufficient attention so that the main
equipment does not fall. You can remove the hook
by unfastening screw.
3. Environmental Protection
The tool and its accessories contain much raw
materials and plastics that can be recycled after
their life. Therefore, plastic parts are indicated
with their material types so that they can be
classified and recycled for each material type.
Do not dispose of the battery with home garbage
or into the fire or river.
4. What to do when the tool does not work
normally
For power tool with type Y attachment: if the
replacement of the supple cord is necessary, this
has to be done by the manufacture or his agent in
order to avoid a safety hazard. It is very dangerous
for customers to trouble shoot or repair the tool
for themselves, Contact the nearest A/S centre
(sales agency) and request for a service.
The repair shall be requested to the qualified
electric specialist.
10
8
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.