Description Of User Interface - Vimar TAB 7 Guía Rápida

TAB: 40607
KIT installation
Power up the KIT devices, such as the TAB 7S IP (art. 40607) and IP A/V unit (art. 41006), connecting them to the same
network, and wait until the initial screen described above appears on the display. Press the Menu icon in the top left corner
and select the KIT configuration option. Complete the steps (language and date/time settings) and wait for the procedure to
complete, at which point the device will reboot in operating mode.
If an error message is shown on the screen, make sure that all the devices are properly connected and powered up, then
try again.

Description of user interface

a
a) Talk/listen button - On an incoming call, press this button to accept the call. In conversation, the microphone is switched
on/off (mute function), alternately. In all other cases, pressing the button causes the configured function to be triggered,
for example self-starting a specific speech unit.
b) Lock button - During a call or a conversation with a speech unit, press this button to activate the lock output of the speech
unit, if previously configured. In all other cases, pressing the button causes the configured function to be triggered, for
example activating the lock output of a specific speech unit.
c) Header – User name, date and time, master device (M) indication, status icons.
d) Settings – User configurable parameters: user name, device identification name, interface language, date and time (auto-
matic or manual), display brightness and button backlighting, ringtones, volume, call options and video voicemail message.
Some of the parameters can only be configured on the user's master video entryphone.
Call log – List of incoming and outgoing calls, rejected and missed calls.
e)
Contacts list – Collects all the system contacts divided by type:
f)
12
40607_49400925a0_Quik Guide_01.indd 12
c
d e
i
m
EN
g
f
h
l
b
27/09/2017 16:39:07