Troubleshooting; Error Correction; Care Instructions - ProMed HKP-1.6 XL Instrucciones De Empleo

TROUBLESHOOTING

Problem Cause
The device is not correctly connected
to the operating unit
Does not work
The automatic deactivation function
has been activated
Did you insert the plug (A) into the
wall socket first and then the plug of
the operating unit (J) into the socket
of the heating pad (K).
F is flashing
in the display
Has the plug of the operating unit (J)
been accidentally removed from the
socket of the heating pad (K).

CARE INSTRUCTIONS

DANGER - Risk to life due to electric shock
• Before cleaning the heating pad, pull the plug out of the socket and remove the heating pad from the
operating unit.
• Neither the operating unit nor the mains cable may get into contact with humidity, water or other fluids since
there is a risk of electric shock. Additionally, the heating pad itself may not get moist while being used. Only
use it in a dry state and never use it when it is wet!
• The heating pad can be washed in the washing machine at 30 °C with mild detergent.
• Do not iron the heating pad and the cover.
• Do not bleach the heating pad.
• Do not dry-clean the heating pad and the cover.
• Do not tumble dry the heating pad and the cover in a dryer.
• Do not use a high pressure cleaner
• Let the heating pad cool down completely before cleaning it after use.
1. Pull the plug out of the socket.
2. Pull the plug of the operating unit out of the socket of the heating pad.
3. Wash the heating pad and the cover at 30 °C in the gentle cleaning cycle.
When washing it manually, do not bend it or wring it out.
4. Let the heating pad and the cover air-dry in an unfolded state in a warm
environment. Do not use any aids (e.g. clothespins) to put it up for drying. This
could damage the internal cables
DANGER - Risk to life due to electric shock
• After washing, wait until the heating pad and the cover have dried completely before inserting the mains
plug and connecting it to the power supply. Never use the heating pad in a wet state!
• Never switch on the heating pad for drying.

Error correction

Ensure that the plug of the operating unit
(J) and the socket of the heating pad (K)
are tightly connected
With the On/Off button (F) you can
switch the heating pad on and off.
Insert the plug of the operating unit (J)
into the socket of the heating pad (K) first
at all times before inserting the plug (A)
into the socket.
Pull the plug (A) out of the socket and
insert the plug of the operating unit (J)
into the socket of the heating pad (K).
Insert the mains plug(A) into a socket
again.
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR