English (Original Instructions) - DeWalt D25832 Traducido De Las Instrucciones Originales

EnGLIsH
HEAVY-DUTY CHIPPING HAMMER
D25832
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Frequency
Power Input
No-load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Weight (including handle)
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a =
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
16
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Heavy-Duty Chipping Hammer
D25832
D25832
V 230
AC
D
e
V 230/115
Technical Data are in compliance with:
AC
1
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
Hz 50 2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
W 1350
Nürnberg, Germany, Notified Body ID No.: 0197.
bpm 1450–2900
Level of sound power according to 2000/14/EC
J 10.5
(Article 12, Annex III, No. 10; m ≤ 15 kg):
SDS MAX
L
WA
kg 7.4
L
WA
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
dB(A) 95
The undersigned is responsible for compilation of the technical
dB(A) 106
file and makes this declaration on behalf of D
dB(A) 3
m/s² 8.7*
Markus Rompel
m/s² 1.5
Vice-President Engineering, PTE-Europe
D
e
D-65510, Idstein, Germany
01.10.2019
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.



WALT declares that these products described under
(measured sound power level)
(guaranteed sound power level)
WALT, Richard-Klinger-Straße 11,
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
dB(A) 101
dB(A) 103
WALT at
e
WALT.
e