Tools Needed For Assembly; Parts List - peerless-AV ACCXT201 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: Read entire instruction sheet before you start installation and assembly.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.

Tools Needed for Assembly

• phillips screwdriver
• level
• utiltiy knife
Before you begin, make sure all parts shown are included with your product.

Parts List

Description
A horizontal bracket
B cover
C left mount bracket
D right mount bracket
E M5 x 16mm self tapping screw
F
washer
G left cap
H right cap
I
adjustment bracket
Parts may appear slightly different than illustrated.
WARNING
Qty. Part #
2
125-P1259
2
125-1274
1
125-P1262
1
125-P1260
6
520-9515
6
540-9400
2
125-1276
2
125-1275
2
125-P1261
2 of 14
A
E
F
ISSUED: 09-26-11 SHEET #: 120-9119-2 03-02-12
B
C
G
H
I
D

Publicidad

Tabla de contenido
loading

Tabla de contenido