Thermador Pro Grand Serie Manual De Instrucciones página 5

Toe kick panel installation
Tools needed
• Protective work gloves
To remove the front foot cover assemblies
1. The mating part has dimples that seize the top piece
of the foot cover. Spread the top cover out and slide it
down to clear these dimples. Repeat for the other
front foot cover assembly.
2. Remove the leg covers by sliding the top, outer sleeve
of the leg covers off the extruded dimples of the base.
To install the toe kick panel
1. Remove protective plastic covering from the toe kick
panel.
2. Remove the door trim from its mounting clips. (No
tools required.)
3. Press the toe kick panel into the mounting clips.
NOTE: The mating part has extruded dimples on both
sides for which the holes of the toe kick panel should
seize. You should feel a definitive snap, letting you know
that the part has been installed.
Page. 4