Sophos XGS 87 Guia De Inicio Rapido página 6

3. Power Up the Appliance
Connect the power cable and turn on the appliance
Connect the appliance to the power supply using the power cable(s). Turn the appliance on. The power
switch is on the back of the appliance next to the power connection. The Status LED will turn to solid
green and the unit will boot. This process should take a few minutes.
4. Connect Your Administration PC
Administration PC connection properties:
Use the settings below to configure your (PC/laptop) network interface:
Ì IP address: 172.16.16.2
Ì Netmask: Enter 255.255.255.0
Ì Default Gateway: Enter the IP address of the appliance's internal
network card (Port1/LAN): 172.16.16.16
Ì DNS Server: Enable this option and enter the IP address of the
internal network card (Port1/LAN): 172.16.16.16
Connect your PC/laptop to Port 1/LAN of the appliance:
Start the browser and enter the IP address of the appliance's LAN port that your PC is connected to:
https:/ /172.16.16.16:4444
Login with the default details below:
Username: admin
Password: admin
Quick Start Guide XGS 87(w)/107(w)
ENGLISH
Internet
e.g., DSL modem
2/WAN
XGS Appliance
1/LAN
Switch
Internal network
admin client PC
5