Menu - Ametek JOFRA ITC-155 A Manual Del Usuario

2.9

MENU

The MENU function (cf. Fig. 6) is used to modify the SETUP
parameters.
Hold down
appear on the display.
Press
Press
Press
change. The current value will flash.
Press
Press
return to the previous value.
Once you have changed all SETUP parameters as required,
cancel the function by pressing
for approx. 2 seconds. The word
. The first SETUP parameter will be displayed.
or to toggle between the SETUP parameters:
Temperature unit °C or °F.
:
: The highest permissible temperature for
the calibrator.
: Temperature change per minute used
in connection with SWITCH TEST.
: Extra time which must elapse once the
well is stable before the check mark
symbol is displayed.
: Temperature resolution of 0 or 1
decimal.
to select the SETUP parameter you wish to
or to select the required value.
to accept your selection or
twice.
9/12
will
to cancel and
ENGLISH