Operating Instructions - Phase Linear PCD161A Manual Del Usuario

PCD161A

OPERATING INSTRUCTIONS

Power On/Off Button ( )
1
Press the power button (1) to turn the unit on or
off.
Liquid Crystal Display Panel
2
The Liquid Crystal Display (LCD) panel displays
the frequency, time and all activated functions.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
Volume Control (VOL)
3
To increase the volume level, press the VOL +
up button (3a). To decrease the volume level,
press the VOL – down button (3b). The volume
will increase/decrease and the level will be
shown on display panel from a minimum of
"VOL 00" to a maximum of "VOL 46". The
display will automatically return to the normal
indication 5 seconds after the last volume
adjustment or when another function is
activated. These buttons are also used in
conjunction with the SEL/MENU button (4) to
adjust the bass, treble, balance and fader
levels.
Select (SEL/MENU) Button
4
This SEL/MENU button (4) is used to select the
audio function (volume, bass, treble, balance or
fade) to be adjusted using the volume buttons
(3). Press the SEL/MENU button once to set
the unit for volume adjustment ("VOL" and the
setting number will appear on the display
panel). Press the button additional times to
select bass ("BAS" on display panel), treble
1 3a
4
MODE
3b
7
(TRE), balance (BAL), fader (FAD), and volume
(VOL) again. The display returns to the normal
indication 5 seconds after the last adjustment
was made or when another function is
activated.
2
PCD161A
DISP
AUX IN
SCN BAND
5
17