Care And Maintenance; Important - AgraTronix HT-PRO Instrucciones De Uso

CARE AND MAINTENANCE

1.
After each use, always store your tester in a clean, dry and handy place.
2.
The metal tip of the probe should be wiped clean between each use for
best results. Clean both parts of the metal tip from time to time with fine
steel wool and/or mineral spirits or alcohol. A dirty tip can cause lower
read-ings. Keep the brass shiny for best results.
3.
Never immerse the probe in water.
4.
Remove the battery, if your tester will not be used for several months.
TROUBLESHOOTING
1. Read this manual again. Carefully.
2. Clean probe tip and re-calibrate tester.
3. If "LOBAT" is displayed, replace the battery with a new 9-volt ALKALINE
battery. Re-calibrate the tester.
IMPORTANT: Keep original invoice or other proof of purchase. Proof of purchase is
re-quired to determine if service will be performed within the warranty period at no
charge.