System Overview - Husqvarna AUTOMOWER 550 EPOS Guia Rápido

QUICK GUIDE
A

System overview

The EPOS system contains a robotic lawn mower, a
charging station and a reference station. The robotic
lawn mower and the reference station receive satellite
signals for positioning. The reference station is
stationary and sends correction data to the robotic lawn
mower to get an accurate position for the robotic lawn
mower. The work area is made virtually in an app by
operating the product and adding waypoints to make a
map in an app.
1. Navigation satellites
2. Satellite signals
3. Reference station
4. Correction data
5. Charging station
6. Virtual boundary
7. Stay-out zone
8. Work area
9. Mobile device
10. Docking point
11. Transport Path
For a complete map installation a work area and a
charging station are necessary. A work area is an area
where the product can operate and cut grass
automatically. A work area is specified by virtual
boundaries. The charging station can be put in the work
area or near the work area that is connected to it with a
transport path. A transport path is a specified path
between the docking point and a work area. The product
can operate automatically in this path, but does not cut
grass. Stay-out zones can be made if there are areas
where the product is not allowed to operate. A stay-out
zone is specified by virtual boundaries. A point of interest
is a specified position where the product can be parked
at.
B
Connectivity
a. Automower® Connect app is used for settings and daily
operation of the product.
b. Husqvarna Fleet Services™ is a cloud solution that gives
the commercial fleet manager an updated overview of all
the products. This is available both as a web service and
as an app.
QG_P2Z_1142322.indd 3 QG_P2Z_1142322.indd 3
C
Installation
The reference station and the robotic lawn mower need
unimpeded sky view to be able to operate reliable
without stops.
1. Install the Automower® Connect app and Husqvarna
Fleet Services™ app to your mobile device. Download the
apps from App Store or Google play.
2. Install the reference station. Refer to Operator's manual
for the reference station.
3. Install the charging station.
4. Pair the robotic lawn mower with the app.
5. Pair the robotic lawn mower with the reference station in
the app.
6. Pair the robotic lawn mower to the charging station and it
will specify the docking point in front of the charging
station.
7. Specify the work area by operating the product clockwise
with appDrive around the work area and adding
waypoints on the map in the app.
8. Specify the stay-out zones by operating the product
counter clockwise with appDrive around the stay out
zone and adding waypoints on the map in the app.
9. Specify the transport path by starting in the work area
and operate the product with appDrive and adding
waypoints on the map in an app. When saving the
transport path it is connected to the docking point.
10. Specify the point of interest and make a path to the
charging station. Start at the point of interest and operate
the product with appDrive and adding waypoints on the
map in an app. When saving the point of interest the path
is connected to the docking point.
11. Use the app to adjust the schedule and the settings for
the robotic lawn mower.
For more information, read the Operator's manual
for the reference station and the Operator's
manual for the robotic lawn mower.
EN en
2021-01-13 15:52:55 2021-01-13 15:52:55