Before Installing The Appliance; Ambient Temperature - Saivod VS1821 Manual De Instrucciones

OVERVIEW
1. Interior LED lights
2. Wire shelves
3. Light button
4. ℉/℃ button
5. Temperature display
6. Temperature setting buttons

BEFORE INSTALLING THE APPLIANCE

Before connecting your appliance to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage
could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all
times. To turn off main power to the appliance, detach the plug from the outlet. Do not im-
GB
merse the appliance, the power cord or the plug in water or other liquids.
The appliance must be grounded. The manufacturer is not responsible for damages that may
occur as a result of usage without grounding.
INSTALLING THE APPLIANCE
This appliance is designed to be free standing only.
Install the appliance in a dry, well ventilated room. The installation location should neither be
exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on
each side of the cabinet
For uneven surfaces, front feet can be adjusted.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature between 16°C and 32°C. If
these temperatures are exceeded, i.e. colder or warmer, the appliance will not operate cor-
27