Chauvet DJ SlimPAR PRO Q USB Guía De Referencia Rápida página 4

SlimPAR PRO Q USB QRG
Mounting
Mounting
Diagram
Control Panel
Description
D-Fi USB
Connectivity
Before mounting this product, read the
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Mounting Bracket
Bracket Adjustment Knob
Button Function
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
The SlimPAR PRO Q USB is able to become a D-Fi wireless
receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into
the USB port, then set the product's DMX personality and starting DMX
address. Further instructions for connecting and configuring this product for
D-Fi USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the
USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX,
manual display control/menu buttons and IRC-6 will be unavailable
until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
Safety
4
Notes.
Safety Cable
(such as CH-05
from Chauvet)
EN