Connections And Installation - Phonocar VM188 Manual De Instrucciones

Connections and installation

1) Connection:
The device must be supplied with a voltage between 9 V and 33 V.
2) Video signal connection
Connect the video signal output to the video input of the AV1/AV2/HDMI device.
FUSE BOX
Using M5 x 40 with full thread drill tail
screw the top frame on the vehicle's
roof.
6
RED + 9V --> 33V
BLACK - Ground
AV1 INPUT (YELLOW)
AV2 INPUT (YELLOW)
HDMI INPUT
NOT ACTIVE (RED)
NOT ACTIVE (WHITE)
EN