Publicidad
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
INSTALLATION ON MASONRY PILLARS, MAKING A NICHE
b
d
a
60
155 Min.
BACK FIXATION MOUNTING
If the back fixing has to be screwed (Fig.11) and the (A) holes are used, the fixing must be cut at a distance
of 65 mm from its end, if instead you use the other holes it is not necessary to do the cutting.
The support must be positioned so that the operator is in perfect horizontal position (Fig.14).
N.B.: During assembling the back and front fixations lubricate with water repellent grease.
Back fixing
to be screwed
Fig. 11
18
67411010
®
d
200
80 Min.
1078
60
155 Min.
WARNING: During installation, make sure
that the cables do not interfere with the
niche.
If you have to make a niche observe the
dimensions shown in fig.10.
DIMENSIONS IN mm
A
A A
A
A
Rev. 09 - 07/2013
SURF
English
English
Fig. 10
Publicidad
