Festool MX 1600/2 EQ DUO Manual De Instrucciones página 10

upward and the upper paddles force the material
downward.
Paddle Stirrers HS 3 Double (accessory)
For mixing of heavy materials with high viscosity.
Two stirrers, each with three spirals, work against
each other. The material is mixed with a comb-
like mixing action.
Move the machine up and down while stirring.
Clean the stirrer after use.
7 Service and maintenance
WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
Use only original Festool spare parts! Or-
EKAT
4
der No. at: www.festool.com/Service
5
3
2
1
- After approx. 200 hours of operation, renew the
grease fi lling in the gearbox.
To verify that the double insulation is in-
tact, the machine must be subjected to a
safety test afterwards. Therefore, these
maintenance tasks are to be performed
only by a professional electroworkshop.
- Periodically clean the venting slots on the mo-
tor housing.
- The machine automatically switches off if the
carbon brushes are worn. The machine must
be sent to the workshop for maintenance work.
- We recommend that you clean the machine
regularly. Remove any dust, residual mixing
material and any other dirt. If you use solvent-
based cleaning agents, these may damage the
painted surfaces or the plastic parts. If you use
these cleaning agents, we recommend that you
test the effect of these agents on a small, con-
cealed area. The ventilation holes on the motor
hood must not be blocked.
- Commission an authorised workshop to
change brushes, the power cable etc.. If the
machine is knocked in any way, it is also nec-
essary to entrust an authorised workshop in
order to prevent any mechanical or electrical
danger arising.
- The packaged machine can be stored in a dry
place without heating as long as the inside
temperature does not fall below −5 °C. The
unpackaged machine must only be stored in
a dry, enclosed space where the temperature
does not fall below +5 °C and where no extreme
temperature fl uctuations occur.
10 Environment
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
11 EU Declaration of Conformity
Stirrer
MX 1600/2 EQ DUO
Year of CE mark: 2013
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU,
EN 55 014-1, EN 55 014-2, EN 60 745-1, EN
61 000-3-2, EN 61 000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-04-15
10
Serial no.
769238