Warranty Exclusions - IXS xult Manual Del Usuario

WARNING
Improper placement of the interior comfort lining will compromise the function of the helmet and could result in serious injury or death.
Always make sure the padding correctly positioned and securely fastened before use. Do not use any pads that are not specifically designed
for this helmet and sold by iXS. Aftermarket pads/liners may not fit properly and could cause serious injury or death.
STRAP COVER REMOVAL/INSTALLATION
• Strap Covers are held in place via snap buttons located on the top and bottom of the strap and may be removed for cleaning.
• When reinstalling carefully align snap button and press firmly until snap is engaged.
VISOR ADJUSTMENT/REPLACEMENT
To Adjust:
• Loosen the adjustment bolt located under the center of the visor and pivot the visor
either up or down depending on the desired position.
• Hand tighten the adjustment bolt to secure the position.
To Remove:
• Remove the central adjustment bolt by hand and the side screws with either with a
coin or flat head screwdriver.
To Replace:
• Position the replacement visor on the helmet and secure in place by hand tightening
the central adjustment bolt and side screws with coin or screwdriver.
WARRANTY
iXS products is offering a two year warranty. Bring or send your iXS Xult Helmet and the retail seller's original receipt as a proof of the date
of purchase to the retailer where you purchased the item. Any postage, insurance or shipping costs incurred in sending your iXS product for
service under either option above is your responsibility. iXS will not be responsible for products lost or damaged in shipping.

WARRANTY EXCLUSIONS

• Helmets that have been involved in accidents, modified, poorly maintained or used for commercial purposes.
• Damage occurring during shipment of the products (such claims must be presented directly to the shipper).
• Damage to products resulting from improper assembly or repair, the use or installation of parts or accessories not compatible with the
original intended use of the product, or the failure to follow the product warnings and usage instructions.
• Damage or deterioration to the surface finish, aesthetics or appearance of the product.
• Any products for which the consumer does not follow the warranty procedures outlined above.
9
EN