Installation Of Accessories; Ec Declaration Of Conformity - THERMOBILE ITA ROBUST Serie Manual Del Usuario

English
9

INSTALLATION OF ACCESSORIES

9.1 Flue with raincover (fig. 4)
The heater is provided with a flue connection.
1. Fit a flue (B) to the flue connection (C).
Caution
The flue must point upwards. Never
place the flue pipe horizontal. An
angle of 45° is acceptable; minimum
length flue 1 m.
2. Fit a raincover (A) to the end of the flue.
9.2 Outlet hose
An outlet hose can be fitted to the outlet of
the heater, in order to blow heated air to a
remote space away from the heater.
Caution
Check the temperature resistance of
the used hose.
/i
Single ITA 45
outlet Robust
Max. L = 6 m:
length
∅400
mm
/i
Two way ITA 45
outlet Robust
Max. L = 6 m:
length
∅300
mm
(each)
Please contact the dealer for information
about maximum lengths of outlet hoses,
bends, distribution pipes and hose clamps.
9.3 Room thermostat
See the instructions of the room thermostat.
9.4 Tank heating
See the instructions of the tank heating.
2 2
22
ITA 75
Robust
L = 6 m:
∅400
mm
ITA 75
Robust
L = 6 m:
∅300
mm
(each)
4 0 0 . 2 0 0 . 0 5
40.019.005 rev 00 - 2013
10 EC DECLARATION OF
CONFORMITY
For the EC declaration of conformity, go to
www.thermobile.nl.
- e r . v 0 7 - 2 0 1 1 T I / A T I A S
ITA 45/75 ROBUST