Features; Sagittal Saw; Safety Switch; Definitions - Stryker SYSTEM G Manual Del Usuario

EN

Features

Sagittal Saw

A
A Safety Switch – Locks the trigger.
Blade Lock Button – Releases the cutting
B
tool from the handpiece.
C Blade Mount – Retains the cutting tool in
the handpiece and allows the tool to be
indexed in 45-degree increments to achieve
the desired cutting angle.
D Trigger – Controls the variable speed
operation of the handpiece.
Door – Opens to allow installation of a
E
power module.
F Latch – Secures the door.
4
B
C
D
E F

Safety Switch

Run Mode – The trigger is
functional.
Safe Mode – The trigger is locked
to prevent inadvertent operation of
the handpiece.

Definitions

The symbols located on the equipment and/or labeling
are defined in this section and/or in the Symbol Definition
Chart. See the Symbol Definition Chart supplied with the
equipment.
Symbol Definition
General Warning Sign
Run Mode
Run Mode
1 min/ Duty Cycle (See the Specifications
section.)
4 min X 5
Lock
Unlock
Direction of Rotation
Alignment Mark
USE ONLY
STRYKER
Use only Stryker power module.
POWER
MODULE
STERILIZE
WITH DOOR Sterilize with door fully open.
FULLY OPEN
Full Insert
7308-001-700 Rev-A
www.stryker.com