Maintenance; Carry Out The Following Periodic Checks On The Power Source; Responsibility; Alarm Codes - voestalpine Böhler Welding URANOS NX 3200 PME Manual Del Usuario

6. MAINTENANCE

Routine maintenance must be carried out on the system according to the manufacturer's instructions. When the
equipment is working, all the access and operating doors and covers must be closed and locked. The system must
not be modified in any way. Prevent conductive dust from accumulating near the louvers and over them.
Any maintenance operation must be performed by qualified personnel only. The repair or replacement of any parts
in the system by unauthorised personnel will invalidate the product warranty. The repair or replacement of any parts
in the system must be carried out only by qualified personnel.

6.1 Carry out the following periodic checks on the power source

6.1.1 System
6.1.2 For the maintenance or replacement of torch components, electrode holders and/or
earth cables:

6.2 Responsibility

Failure to carry out the above maintenance will invalidate all warranties and exempt the manufacturer from any
liability. The manufacturer disclaims any responsibility if the user fails to follow these instructions. For any doubts
EN
IEC
and/or problems do not hesitate to contact your nearest customer service centre.

7. ALARM CODES

ALARM
CAUTION
E01
E03
E06
E08
E02
E05
E07
E10
81
MAINTENANCE
EN