Recording - Samsung LE52F9 Instrucciones Del Propietario

anynet+ menu
the anynet+ menu changes depending on the type and status of the anynet+ devices connected
to the tV.
anynet+ menu
View tV
Select Device
record
menu on Device
Device operation
receiver
Setup
tV remote Control buttons available in anynet+ mode
Device type
anynet+ Device
Device with built-in tuner
audio Device
anyview2
➣
The Anynet+ function only works when the remote control is set to TV.
➣
The reC button works only while in the recordable state.
➣
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.
➣
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
➣
The Anynet+ functions don't operate for the products from other manufacturers.
➣
In Anynet+ mode, the colour buttons may not work properly.
➣
The ◄◄, ►► operations may differ depending on the device.

recording

You can make a recording of a tV programme using a recorder.
Press the reC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣
You can also record the source streams by selecting record after pressing the Anynet+ button.
➣
Before recording, check whether the antenna jack is properly connected to the recording device. For
the antenna connection to the recording device, refer to its user manual.
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder's
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
After switching to the device,
when you are watching a TV
programme
When Receiver is activated
When watching TV
english - 59
Description
available buttons
Numeric buttons
▲/▼/◄/►/enter/oK buttons
Colour buttons
exIt button
◄◄(Backward search)
►►(Forward search)
(Stop)
► (Play/Pause)

CH ▲/▼ button
VOL +/- button
MUTE button
► (Play/Pause)
