Samsung LE52F9 Instrucciones Del Propietario página 8

Supported modes for HDMI/DVI and Component
480i
HDMI/DVI 50Hz X
HDMI/DVI 60Hz X
Component O
4 ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 Common InterFaCe Slot
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
6 WISelInK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
7 headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
8 S-VIDeo or VIDeo / r-auDIo-l
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre
sponding audio out connectors on the A/V device.
9 PC In (PC)/(auDIo)
- Connect to the video and audio output jack on your PC.
0 DIgItal auDIo out (oPtICal)
- Connect to a Digital Audio Component.
! SerVICe
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
viewing angle using your remote control.
The model LE70F9 cannot be wall mounted. The EX-LINK jack on this model functions as a service
jack.
@ ComPonent In
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
set.
- The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labeled
R B
Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 1080p mode.
- This LCD TV displays its maximum picture resolution in 1080p mode.
# Kensington lock (depending on the model)
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
480p 576i
X X
O X
O O
english - 
576p 720p
O O
X O
O O
", "P
R
1080i 1080p
O O
O O
O X
", "Y") on the rear of
B
", "P ", "Y") on your
R B