REVENT RVLH50 Guia De Instalacion página 21

9.) After sheetrock is installed, press and bend the final securing tabs flat against
ceiling to lock the FAN in place.
final securing tabs
apply even
pressure to
each side of
securing tab
10.) Align TRIM RING to vent position. Vent position is marked on TRIM RING
with the world "VENT". Attach TRIM RING to FAN. TRIM RING attaches to FAN
body and presses into place when secure.
ceiling
11.) Select desired LED color temperature by sliding the selector switch on the
back of the SHIELD.
FAN
SHIELD
20
sheetrock
(ceiling)
electrical enclosure
final securing tabs
TRIM RING
warm white (2700K)
bright white (4000K)
daylight (5000K)