Removing Your Old Fan - REVENT RVLH50 Guia De Instalacion

Removing An Old Fan
Watch the video: reventfans.com/how-to-remove-an-old-bath-fan
1.) Disconnect the electrical power supply and lock out the service
panel for the existing fan.
2.) Remove the grille from the existing fan. Pull the grille down to expose it's two
springs. Squeeze each spring together and pull down again to release the springs
from the motor plate slots.
ceiling
springs
grille
3.) Unplug the fan motor.
fan motor
4.) Loosen the motor plate by inserting a flathead screwdriver into the slot in the
housing and twisting the screwdriver.
Pry loose with flat head
screwdriver if needed
7