Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Loosen the wing nut
6. Remove the grinding wheel
7. To install a new grinding wheel, reverse the above procedure.
8. Turn the grinder on and let it come up to speed and idle for a couple of minutes.
Switch on to operate the tool.
Switch off to disconnect the tool
53
Power switch
Changing the griding wheel
This bench grinder is equipped with a jack light. The light bulb is
not included. It can be bought in the nearest store.
Caution: use a 40 W light bulb.
Warning: before installing the light bulb, plug out the tool.
To switch the jack light on, move the switch in a clockwise
direction (8) and in a counterclockwise direction to switch off.
Installation
and set off
Jack ligth
54
Publicidad
Tabla de contenido
