BAUKER CCP240JD Manual De Instrucciones página 34

1. Slide the switch to the left, to the "ON" position.
When starting the tool, make sure it is in contact with the work surface. Turn it off only
after it is not in contact with the surface.
The polisher can release wax in excess while it is in use.
Figure 7: The polisher is started by means of the switch.
65
Staring the polisher Turning the polisher off
1. Slide the switch to the right, to the "OFF" position.
2. After using the tool, unplug it from the from the socket.
Figure 8: The polisher is turned off by means of the switch.
Operation and use
Turning the tool on and off
66