Symbols - Homelite UT43123 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Wear Eye, Hearing, and
Head Protection
Wet Conditions Alert
SAFE-T-TIP Nose Guard
Operate With Two Hands
One Handed
Kickback
Bar Nose Contact

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation, that, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates information considered
important, but not related to a potential injury (e.g. messages
relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection with side shields marked to comply with
ANSI Z87.1 as well as hearing and head protection when
operating this equipment.
Do not expose to rain or use in damp locations.
The SAFE-T-TIP nose guard on the guide bar helps prevent
kickback.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
DANGER! BEWARE OF KICKBACK.
Avoid bar nose contact.
Page 9 — English
DESIGNATION/EXPLANATION