HEIDENHAIN MSE 1180 Instrucciones De Instalación página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
Mounting a module
To mount a module:
Verify power is removed from all power supply modules in the module chain
X
X
Align the bottom edge of the DIN rail with the bottom channel 12 of the module
X
X
Gently apply upward pressure, depressing the DIN rail spring 11 and inserting the DIN
X
X
rail into the bottom channel 12 of the module
While maintaining upward pressure, rotate the top of the module towards the DIN rail
X
X
until the top channel 10 of the module is aligned above the DIN rail
Gently release the upward pressure, locking the module onto the DIN rail
X
X
Connecting modules
Notice
This product contains components that can be damaged by electrostatic
discharge (ESD). Observe precautions for handling ESD sensitive devices and
never touch connector pins unless properly grounded.
To connect modules:
Verify power is removed from all power supply modules in the module chain
X
X
Slide the right module to the left until the lock tab 3 of the left module engages with
X
X
the lock tab receiver 8 of the right module
Mounting a module
Observe ESD handling precautions
Connecting modules
22

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mse 1380

Tabla de contenido