Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio housing • C) Radio brackets • D) Pocket • E) (7) Panel clips • F) (8) #6 x 3/8" Phillips screws
• G) (4) #8 x 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Chrysler 300 2005-2007
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
C
D
F
MetraOnline.com
E
G
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-6516B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly
–ISO DIN radio provision with pocket . .................3
–ISO DDIN radio provision . ....................................4
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: XSVI-6502-NAV • CHTO-01
Antenna Adapter: 40-CR10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 7mm Socket wrench
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 2/27/18 INST99-6516B
Publicidad
Manuales relacionados para Metra 99-6516B
Resumen de contenidos para Metra 99-6516B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/27/18 INST99-6516B...
- Página 2 DASH DISASSEMBLY 1. Unclip and remove entire panel surrounding radio and climate controls, including A/C vents and clock. (Figure A) 2. Remove (4) 7mm screws securing radio to dash and remove radio. (Figure B) 3. Remove factory vents, clock, switch plate, and climate controls from the factory radio panel and transfer to the 99-6516B radio panel using the screws provided in this package. Continue to Kit Assembly (Figure A) (Figure B) 1.800.221.0932 MetraOnline.com...
- Página 3 1. Attach the radio brackets to the radio complete all necessary connections to housing by sliding the grooves in the the radio. Metra recommends using brackets, into the housing. The following the proper mating adapter from Metra step will secure the brackets in place. and/or Axxess. Test the radio for proper (Figure A) operation. 2. Attach the pocket to the radio brackets 6. Secure the radio assembly to the dash using the (4) #8 x 3/8” Phillips screws using the factory screws. provided. (Figure B) 7. Attach the (7) panel clips provided 3. Remove the metal DIN sleeve and trim to the 99-6516B radio housing trim (Figure A) (Figure C) ring from the aftermarket radio. panel, then reassemble the dash in 4. Slide the radio into the bracket/pocket reverse order of disassembly using the assembly, and then secure it using the 99-6516B radio housing trim panel to screws supplied with the radio. complete the installation. (Figure C) (Figure B) REV. 2/27/2018 INST99-6516B...
- Página 4 KIT ASSEMBLY ISO DDIN radio provision 1. Attach the radio brackets to the radio housing by sliding the grooves in the brackets, into the housing. The following step will secure the brackets in place. (Figure A) 2. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra (Figure B) and/or Axxess. Test the radio for proper operation. (Figure A) 4. Secure the radio assembly to the dash using the factory screws. 5. Attach the (7) panel clips provided to the 99-6516B radio housing trim panel, then reassemble the dash in reverse order of disassembly using the 99-6516B radio housing trim panel to complete the installation. 1.800.221.0932 MetraOnline.com...
- Página 5 REV. 2/27/2018 INST99-6516B...
- Página 6 1.800.221.0932 MetraOnline.com...
- Página 7 REV. 2/27/2018 INST99-6516B...
- Página 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/27/18 INST99-6516B...
- Página 9 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/27/18 INST99-6516B...
- Página 10 DESMONTAJE DEL TABLERO 1. Desenganche y retire todo el panel que rodea el radio y los controles del clima, incluyendo las rejillas del aire acondicionado y el reloj. (Figura A) 2. Retire los (4) tornillos de 7 mm que sujetan el radio al tablero y retire el radio.
- Página 11 1. Fije los soportes de radio a la carcasa y realice todas las conexiones necesarias de la radio deslizando las ranuras en al radio. Metra recomienda el uso de un los soportes, dentro de la carcasa. El adaptador adecuado de acoplamiento siguiente paso asegurará los soportes en de Metra.
- Página 12 3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero y realice todas las conexiones necesarias al radio. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra. Pruebe el radio para verificar (Figura B) si funciona bien.
- Página 13 REV. 2/27/2018 INST99-6516B...
- Página 14 1.800.221.0932 MetraOnline.com...
- Página 15 REV. 2/27/2018 INST99-6516B...
- Página 16 800-354-6782 for more information and take steps www.installerinstitute.com o llame al toward a better tomorrow. 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda MECP Técnicos certificados The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/27/18 INST99-6516B...