Electrical Connections - CAME ZLJ14 Manual Del Usuario

Electrical connections

TSP00 - Transponder sensor
M E
C A
L-N Power supply 230 V DC 50/60 Hz
M-N 24 V DC gearmotor
2-FA1-FC1 Endstop (FROG -A24 - F1024 - F4024)
M-N-ENC 24 V DC gearmotor (AXO-FROG J-A1824)
+ E - Encoder (FROG A24E-F7024E)
10-11 Terminals for powering 24 V DC accessories
10-E3 Courtesy lamp (Contact output: 24 V - 25 W max.)
10-E Cycle lamp / Flashing light (socket rating: 24 V - 25 W max.)
10-5 Open gate indicator-light (socket rating: 24 V - 3 W max.)
11-ES Electrolock connection (12 V - 15 W max)
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
LT001 - Magnetic card reader
Black
Red
2 FA FC B1 B2 S1 GND
2-CX..CY..CZ Re-open during closing (N.C.) socket, re-close during
opening, partial stop or stand-by Obstacle
1-2 Stop button (N.C. contact)
2-3 Opening button (N.O. contact)
2-4 Closing button (N.O. contact)
2-3P Partial opening button (N.O.)
2-7 Keyswitch and/or commands button (N.O.)
B1-B2 Possible output of the radio receiver's second channel (N.O.).
Socket rating: 1 A - 24 V DC.
Antenna connection
N.B.: insert the (R700)
coding board to have
the (TSP00) sensor or
(LT001) card reader
recognised.
R700
CANCELLI AUTOMATICI