Install The Grass Catcher; Install The Mulch Plug; Set The Cutting Height; Operation - GreenWorks 25142 Manual Del Operador

2. Tighten the lower handle with the quick-release levers
(11) on the two sides.
3. Tighten the upper handle with the cam locks (9) and
konbs (10) on the two sides.
Make sure that the two handles are in the same position.
WARNING
Do not make damage to the cables when you fold or unfold
the handle.
7.3

INSTALL THE GRASS CATCHER

1. Remove the mulch plug.
2. Open the rear discharge door (6) and hold it.
3. Hold the the grass catcher (8) by its handle and engage
the hooks on the slots (12).
4. Close the rear discharge door.
7.4

INSTALL THE MULCH PLUG

1. Remove the grass catcher.
NOTE
English
2. Open the rear discharge door (6) and hold it.
3. Hold the mulch plug (4) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.5

SET THE CUTTING HEIGHT

The machine can be set to different blade heights.
1. Pull the height adjustment lever (7) rearward to increase
the blade height.
2. Pull the height adjustment lever forward to decrease the
blade height.
8

OPERATION

Wear eye protection during operation.
8.1

START THE MACHINE

1. Connect the machine into an approved outdoor extension
cable.
9
WARNING
EN