Section 2 Installation; General Information; Receipt Of Equipment; Recommended Storage Practice - Brooks Instrument GCS404 Serie Manual De Instalación Y Funcionamiento

Installation and Operation Manual
X-PR-GCS400-eng
Part Number: 541B175AAG
February, 2012

2-1 General Information

2-2 Receipt of Equipment

2-3 Recommended Storage Practice

2-4 Return Shipment

This section provides installation instructions for the Brooks GCS400 Series
cylinder scale devices.
When the instrument is received, the outside packing case should be checked
for damage incurred during shipment. If the packing case is damaged, the local
carrier should be notified at once regarding their liability. A report should be
submitted to Brooks Instrument at the address below.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
In case you need technical assistance:
USA 888 275 8946
Netherlands +31 (0) 318 549290
Germany +49 351 215 2040
Japan +81 3 5633 7100
Remove the envelope containing the packing list. Outside of your clean area,
carefully remove the equipment from the packing case. Make sure spare parts
are not discarded with the packing material. Inspect the contents for damaged
or missing parts.
If intermediate or long-term storage of the device is required, it is
recommended that it be stored in accordance with the following conditions:
• Within the original shipping container.
• Ambient temperature 21°C (70°F) nominal, 32°C (90°F) maximum, 7°C
(45°F) minimum.
• Relative humidity 45% nominal, 60% maximum, 25% minimum.
Prior to returning any device to the factory, visit the Brooks web site
(www.BrooksInstrument.com) for a Return Materials Authorization Number
(RMA#), or contact the location provided above.

Section 2 Installation

®
Brooks GCS404/GCS405 Series
Korea
Taiwan
China
Singapore
+82 31 708 2521
+886 3 5590 988
+86 21 5079 8828
+6297 9741
2-1