Run Mode - NEO PROTON IP Manual De Usuario

3.2 Menu map
imagen
3.3 Edit static colour
• Combine [Red], [Green] and [Blue] to create an infinite
range of colors (0-255)
• Set the value of the [Strobe] (0-20Hz)
3.4 Activating auto programs
PROTON IP
ENGLISH VERSION
• Select the target [AUTO] program and press [ENTER].
• Programs [AT.01] to [AT.10] are fully pre-programmed
and will not be altered by changes in [EDIT] mode.
• Programs [PR.01] to [PR.10] are fully pre-programmed
and can be edited in [EDIT] mode.

3.5 Run mode

• Enter the [RUN] mode to set working mode.
• [DMX] mode is for using the DMX512 controller to control
fixtures.
• [SLAV] mode is for Master - Slave operation.
3.6 DMX512 settings
• -Enter the [dMX] mode to set the DMX ADDRESS.
p. 5