Installation Procedure; Assembling And Preparing; Unpacking - LG 55EC9300 Manual Del Proprietário

INSTALLATION PROCEDURE

1
Open the package and make sure all the accessories are included.
2
Connect an external device to the TV set.
3
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one
minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased
your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
y y Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
y y
In case of some model, the thin film on screen is a part of TV, so don't take it off.
y y
NOTE
The items supplied with your product may vary depending upon the model.
y y
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
y y
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.
y y
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your TV's USB port.
y y
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a
y y
connection error may occur.
Recommended HDMI cable types (3m or less)
y y
- High-Speed HDMI / cable
®
TM
- High-Speed HDMI ® / cable with Ethernet
TM
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
B
B
A A
*A 10 mm
*B 18 mm
9