Registering Magic Remote
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
To use the Magic Remote, first pair it with
your TV.
1 Put batteries into the Magic Remote and
turn the TV on.
2 Point the Magic Remote at your TV and
press the
control.
(Wheel)
* If the TV fails to register the Magic
Remote, try again after turning the TV off
and back on.
How to deregister the Magic Remote
Press the
same time, for five seconds, to unpair the
(BACK)
Magic Remote with your TV.
»
y
Pressing and holding the
button will let you cancel and re-register
(Home)
Magic Remote at once.
How to use Magic Remote
Shake the Magic Remote slightly to the right and
y
y
left or press
the pointer appear on the screen.
(In some TV models, the pointer will appear when
you turn the Wheel button.)
If the pointer has not been used for a certain
y
y
period of time or Magic Remote is placed on a flat
surface, then the pointer will disappear.
If the pointer does not move as you wish, shake
y
y
Magic Remote to the left and right. The pointer
will move to the center of the screen.
The Magic Remote depletes batteries faster than
y
y
a normal remote due to the additional features.
Wheel (OK) on the remote
(BACK) and
(Home) at the
(EXIT to LIVE)
(Home),
,
buttons to make
/INPUT
MAGIC REMOTE FUNCTIONS
Precautions to Take when Using the
Magic Remote
Use the Magic remote within the maximum communication
y
y
distance (10 m). Using the remote control beyond this
distance, or with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to nearby devices.
y
y
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote.
The Magic remote may be damaged or may malfunction if it
y
y
is dropped or receives a heavy impact.
Take care not to bump into nearby furniture or other people
y
y
when using the Magic remote.
Manufacturer and installer cannot provide service related to
y
y
human safety as the applicable wireless device has possibility
of electric wave interference.
It is recommended that an Access Point (AP) be located more
y
y
than 1 m away from the TV. If the AP is installed closer than
1 m, the Magic remote may not perform as expected due to
frequency interference.
35